Volume 2 - Issue 4, July - August 2026

The different pozzolanic materials like Ground Granulated Blast furnace Slag (GGBS), silica fume, Rice husk ash, Fly ash, High Reactive Metakaolin, are some of the pozzolanic materials which can be used in concrete as partial replacement of cement, which are very essential ingredients to produce high performance concrete. So we have performed XRD tests of these above mentioned materials to know the variation of different constituent within it. Also it is very important to maintain the water cement ratio within the minimal range, for that we have to use the water reducing admixture i.e superplasticizer, which plays an important role for the production of high performance concrete. So we herein the project have tested on different materials like rice husk ash, Ground granulated blast furnace slag, silica fume to obtain the desired needs. Also X-ray diffraction test was conducted on different pozzolanic material used to analyse their content ingredients. We used synthetic fiber (i.e Recron fiber) in different percentage i.e 0.0%, 0.1%, 0.2%, 0.3% to that of total weight of concrete and casting was done. Finally we used different percentage of silica fume with the replacement of cement keeping constant fiber content and concrete was casted. In our study it was used two types of cement, Portland slag cement and ordinary Portland cement. We prepared mortar, cubes, cylinder, prism and finally compressive test, splitting test, flexural test are conducted. Finally porosity and permeability test conducted. Also to obtain such performances that cannot be obtained from conventional concrete and by the current method, a large number of trial mixes are requiredto select the desired combination of materials that meets special performance.

Gautam Kumar Yadav, Sushil Sharma,"Pozzolanic Materials Behaviour on Fiber Reinforced Concrete" International Journal of Advanced Multidisciplinary Research and Educational Development, V2(4): Page(50-57) July - August 2026. ISSN: 3107-6513. www.ijamred.com. Published by Scientific and Academic Research Publishing.